Hydrostatic Steering; Air Cleaner; Cab Filtration - Zetor Proxima CL 80 Operator's Manual

Hydrostatic steering

Check the oil level in the hydrostatic steering tank.
Check the tightening of screws and nuts of the steering
rods and levers.
Check the condition of all the hoses of the hydraulic
steering circuit for damage and for oil leaks.

Air cleaner

If the air cleaner is heavily clogged with dirt, this condition is indicated by a sensor that lights up an indicator
on the dashboard.
Perform other cleaning tasks:
- every day when working with front-mounted implements
or in a dusty environment
- every 100 engine hours.
- always when the relevant instrument panel light is on
See the chapter: Maintenance instructions

Cab filtration

Check and, if necessary, clean the cab ventilation air
filters located in the roof lip.
The replacement of the filters depends on the dustiness of
the working environment. Partial regeneration is
performed by tapping the filter or blowing it with
compressed air. Clean or replace the filter elements after
removing the cover grilles in the roof lip.
Active carbon filters are available on request.
Do not clean the active carbon filter and do not
blow it with compressed air.
PREVENTIVE DAILY SERVICE
PCLPN012
PCLNN071
PCLPN013
29