The Buttons For Activation Of Pto Shafts; Working Modes Of Pto Shafts - Zetor Proxima CL 80 Operator's Manual

PTO DRIVE OF AGRICULTURAL MACHINES

The buttons for activation of PTO shafts

1 - button for activation of the rear PTO shaft
2 - button for activation of the front PTO shaft
When the engine is switched off (the key in the
switch box is in the position 0), the PTO shafts are
deactivated as well. If necessary, at the next start of
the engine the PTO shafts must be reactivated in the
corresponding mode.
PGPPN174

Working modes of PTO shafts

The tractor is equipped with two working modes of PTO
shafts. The selected mode is indicated on the display of
the instrument panel.
A - common working mode with the PTO shaft
the PTO shaft is rotated regardless the tractor is going or
not; the operator must sit on the driver's seat
B - the stationary working mode with the PTO shaft - it is
used when the tractor is used as a stationary drive unit,
e.g. for the drive of chippers, etc.
the PTO shaft is rotated if the tractor is not going and it is
braked with the hand brake; the operator must not sit on
the driver's seat
P18N018
101