High Temperature Of The Cooling Liquid; Full Pushing Filter Of The Hydraulics; Signalling Of Driver's Seat - Zetor Proxima CL 80 Operator's Manual

High temperature of the cooling liquid

High temperature of the cooling liguid is indicated in several stages of warning
A - informative - reduce the engine power
B - warning - stop the tractor, set the engine to idling until the temperature of the cooling liquid is reduced
C - caution - stop the engine, wait until the temperature of the cooling liquid is reduced and check the level of
the cooling liquid; if the cooling liquid starts to be overheated again when the engine is started, stop the
engine and contact the service centre

Full pushing filter of the hydraulics

The full oil filter of the hydraulics is indicated in several stages of warning
A - informative - it will be necessary to perform replacement of the oil filter cartridge of the hydraulics (see
chapter Maintenance Guidelines)
B - warning - it is necessary to perform replacement of the oil filter cartridge of the hydraulics (see chapter
Maintenance Guidelines)
C - caution - perform immediate replacement of the oil filter cartridge of the hydraulics (see chapter
Maintenance Guidelines)

Signalling of driver's seat

A - signalling - the operator left the driver's seat, sit back on the driver's seat
B - defect - there is a defect in the circuit of the safety switch of the driver's seat, some functions of the
tractor may be restricted, contact the service
70
INSTRUMENT PANEL
PHS18N041
PHS18N045
PHS18N047