Activation Of The Front Pto Shaft - Stationary Working Mode; Deactivation Of The Front Pto Shaft - Zetor Proxima CL 80 Operator's Manual

Activation of the front PTO shaft - stationary working mode

The number of PTO shaft revolutions depends on the number of engine revolutions.
When the tractor is not going with its engine running:
A - Brake the tractor with the hand brake.
B - If the tractor is equipped with the reversal system, move the gear shift lever to the neutral position.
- If the tractor is equipped with the reductor of crawling speeds, move the lever of crawling speeds to the
neutral position.
C - The main gear shift lever must be in the neutral position.
D - Leave the driver's seat.
E - Press the button on the right pillar of the cabin for at least one second to activate the front PTO shaft.
The operator must not sit on the driver's seat when pressing the button.
F - Rotation of the front PTO shaft is indicated by displaying the number of revolutions on the display of the
instrument panel. The working mode is indicated by the pictogram on the display of the instrument panel.
If the operator, when working with the front PTO
shaft in the stationary working mode, sits on the
driver's seat, the working mode automatically changes
to the common mode; this state is indicated by
a changed pictogram on the instrument panel.
If the operator, when working with the front PTO
shaft in the stationary working mode, moves the
tractor, an audio signal is generated and the front PTO
shaft is deactivated.

Deactivation of the front PTO shaft

Press the button on the right column of the cabin to
deactivate the front PTO shaft. This state is indicated by
the fact that the revolutions of the front PTO shaft are not
shown on the display of the instrument panel.
108
PTO DRIVE OF AGRICULTURAL MACHINES
P18N027
P18N023