Lifting force of the three-point hitch
Tractor type
Lifting force at the end of lower pull rods of the
rear three-point hitch in the whole range of
lifting at maximum usable pressure with
2 outer cylinders
- cylinder diameter 75 mm (kN)
Lifting force at the end of lower pull rods of the
front three-point hitch in the whole range of
lifting at maximum usable pressure (kN)
Power
Tractor type
Power on the PTO shaft (kW ± 2%)
- at nominal engine revolutions and shifted
1000 rpm of PTO shaft
Non-run-in engine (up to 100 EH)
Run-in engine (over 100 EH)
Tensile force
Tractor type
Maximum pulling force (kN) on swinging pull
on concrete, tractor in emergency version with
the weigh, tyre slip up to 15%
MAIN TECHNICAL PARAMETERS
CL 80
39.7
27
CL 80
45.5
48
CL 80
33,5
CL 90
CL 100
CL 90
CL 100
50
55
52.5
58
CL 90
CL 100
35
36,5
CL 110
CL 110
62,5
65,5
CL 110
38
193