Rear three-point hitch
Serves for connecting carrier-mounted or semi mounted
agriculture machines and tools with linkage points of
category I. or II. pursuant to ISO. The categories differ
based on the length of linkage axis, which is the distance
of the centre of balls of lower linkage joints with connected
tool.
Category I.
Length of linkage axis
Ø of holes of connecting
balls of lower draw bars
pursuant to ISO
Ø of upper draw bar hole 25 mm
Category II.
Length of linkage axis
Ø connecting balls holes
of lower draw bars
pursuant to ISO
Ø of upper draw bar hole 25 mm
1. Upper draw bar
2. Lift rod left
3. Lift rod right
4. Limiting draw bars
5. Lower draw bars
HITCHES
728 mm
28 mm
870 mm
28 mm
PGPPN085
123