Engaging Rear Pto Shaft - Independent Revolutions - Zetor FORTERRA HSX 120 Operator's Manual

ENGAGING REAR PTO SHAFT – INDEPENDENT REVOLUTIONS
With independent revolutions of PTO shaft, the number of revolutions is dependent on the number of engine revolutions.
Gear shift lever of dependent and independent revolutions must be shifted to independent revolutions position (upper posi-
tion of the lever labelled PTO).
With engine running:
1. Select applicable mode of rear PTO shaft clutch starting with regard for the aggregated machine by a switch of rate preselection
for starting rear PTO shaft (1).
2. Select applicable revolutions by switch of selection of rear PTO shaft (2) revolutions
3. Rear PTO shaft is set into operation by switching the switch of rear PTO shaft (3)
The engagement of independent rear PTO shaft is signalized by display of the number of rear PTO shaft revolutions on the dis-
play of dashboard.
If the aggregated machine allows it, engage the rear PTO shaft with minimum revolutions of 1500 rpm.
DRIVE OF AGRICULTURAL MACHINERY
F73 FH12N007
96
FH12N008