Engaging rear PTO shaft - Independent revolutions
The number of PTO shaft revolutions is dependent on the
number of engine revolutions.
With engine running:
1. Select applicable operation mode PTO shaft revolutions
preselection lever.
2. Select applicable revolutions by switch of selection of
rear PTO shaft (1) revolutions.
3. Rear PTO shaft is set into operation by switching the
switch of rear PTO shaft (3).
Engagement of rear PTO shaft is signalized by the display
of the number of rear PTO shaft revolutions on the display
of the dashboard.
Engagement of rear PTO shaft is signalized by the display
of the number of rear PTO shaft revolutions on the display
of the dashboard.
If the aggregated machine allows it, engage the
rear PTO shaft with minimum revolutions of 1500 rpm.
DRIVE OF AGRICULTURAL MACHINERY
83
83
FHD14N012
FHD14N013
FHD14N014