Restoring Factory Settings
Note: Restoring the Factory Settings will erase any current settings that you have on your ED device. Please
ensure your device is not in operation before rebooting it to prevent data loss.
1. To restore the factory settings of your device, open Boost.IO Manager and select the device which
you want to restore.
2. On the left side of Boost.IO Manager, under the 'Other Tasks' section, click the 'Restore Factory
Settings' link.
3. Confirm that you want to restore factory settings of the ED device.
4. The device will be rebooted and the factory settings will be restored.
Firmware Upgrade
Note: Before upgrading your firmware, please ensure your device is not in operation.
1. Open Boost.IO Manager and select your device in the window.
2. On the left side of Boost.IO Manager, under the 'Other Tasks' section, click the 'Firmware Upgrade'
link.
3. When the message box appears confirm that you have selected the correct device. If you wish to
restore the device to default settings click the tick option and then click 'Upgrade'. Otherwise just
click 'Upgrade'
Ethernet Analogue DIO
Product Manual V1.3
© Copyright Brainboxes Ltd
Page 34 of 100