~aaO(Name)
Description:
Command to set the name of the device.
Command Syntax:
Delimiter character
~
aa
Address of the device to be configured in hexadecimal format (
O
Command to set the name of the device
New device name (10 characters max)
(Name)
Checksum
[CS]
(CR)
Carriage Return
Response
:
!aa[CS](CR)
Valid Command:
?aa[CS](CR)
Invalid Command:
!
Delimiter for a valid command
Delimiter for an invalid command
?
Address of the responding device
aa
Checksum
[CS]
Carriage Return
(CR)
Examples:
Set the name of the device to 549Device.
~01O549Device(CR)
Command:
!01(CR)
Response:
Ethernet Analogue DIO
Product Manual V1.2
~aaO(Name)[CS](CR)
© Copyright Brainboxes Ltd
00
to FF)
Page 85 of 100