Table of Contents
Advertisement
Restore Factory Default
Clicking the 'Restore Factory Default' button will revert all the settings on the device back to their factory
default. Just like restarting the device, in order to restore the factory settings, there must be no connection to
the device active. For a list of the factory settings of the device please see section
Factory Default Settings
Network IP Address
Web Server Port
Device Address
TCP Port
Idle Timeout
Data Format
Checksum
Baud Rate
Command Timeout
Slave IDs
Accept All Addresses
TCP Port
Max connections
Idle Timeout
Data Format
Ethernet Analogue DIO
Product Manual V1.3
Network Settings
DHCP Mode
80
ASCII Protocol Settings
01
9500
0
Engineering unit
Disabled
Serial Expansion Settings
9600
200ms
Modbus Protocol Settings
Respond to IDs 0 and 255 only
Disabled
502
8
0 (disabled)
Engineering unit
© Copyright Brainboxes Ltd
6.8 Factory Default
Settings.
Page 52 of 100
Advertisement
Table of Contents
