Table of Contents
Advertisement
5 Boost.IO Manager
Introduction
Boost.IO Manager is a graphical user interface application which will allow you to find your Brainboxes ED
device on a network and then configure some of the settings in Windows. As part of the Boost.IO application a
COM port can be installed which allows communication with the device using the ASCII protocol.
Boost.IO Manager is not required if you want to communicate with the device using just the IP address or if
you want to configure the device only using the web configuration pages.
Boost.IO Manager can be found on the CD that was packaged with your device.
Installing Boost.IO Manager
Insert the CD into your PC
Browse the contents of the CD and locate the "Setup" program on the CD and double click to launch.
Click 'Install' to launch the Boost.IO setup program.
Follow the on screen instructions to install the Boost.IO application.
Ethernet Analogue DIO
Product Manual V1.3
© Copyright Brainboxes Ltd
Page 23 of 100
Advertisement
Table of Contents
