Table of Contents
Advertisement
$aaM
Applies to: All analogue input/output products
Description:
Command to read the name of the device.
Command Syntax:
$
Delimiter character
Address of the device in hexadecimal format (00 to FF)
aa
Command to read the device's name
M
[CS]
Checksum
Carriage Return
(CR)
Response
:
!aa(Data)[CS](CR)
Valid Command:
?aa[CS](CR)
Invalid Command:
Delimiter for a valid command
!
Delimiter for an invalid command
?
aa
Address of the responding device
Name of the device
(Data)
Checksum
[CS]
Carriage Return
(CR)
Examples:
Reads the device name. Command sent to the ED-549 and a valid response is returned with the device's name,
ED-549.
$01M(CR)
Command:
!01ED-549(CR)
Response:
Ethernet Analogue DIO
Product Manual V1.2
$aaM[CS](CR)
© Copyright Brainboxes Ltd
Page 77 of 100
Advertisement
Table of Contents
