Table of Contents
Advertisement
$aaRS
Applies to: All analogue input/output products
Description:
Command to reboot the device.
Note: The device can take a number of seconds to reboot. Close all connections to the device after sending the
command. Connection can be re-established once the device has rebooted.
Command Syntax:
$
Delimiter character
aa
Address of the device to be reset in hexadecimal format (
RS
Command to reset the device
Checksum
[CS]
Carriage Return
(CR)
Response
:
No response
Examples:
Send a command to reset the device. No response is expected.
$01RS(CR)
Command:
No Response
Ethernet Analogue DIO
Product Manual V1.2
$aaRS[CS](CR)
© Copyright Brainboxes Ltd
00
FF
to
)
Page 80 of 100
Advertisement
Table of Contents
