Table of Contents
Advertisement
$aa9n
Applies to: ED-560
Description:
Command to read the full scale range configuration for the specified channel.
Command Syntax:
Delimiter character
$
Address of the device in hexadecimal format (00 to FF)
aa
Command to read channel range configuration
9
Command to specify the channel to read where n is the input channel
n
Checksum
[CS]
Carriage Return
(CR)
Response
:
!aattss[CS](CR)
Valid Command:
?aa[CS](CR)
Invalid Command:
Delimiter for a valid command
!
Delimiter for an invalid command
?
aa
Address of the device which responded
Type code data from the specified channel where rr is the type code from the 'Range settings and
tt
data formats' table
Output slew rate setting for the specified channel
ss
[CS]
Checksum
Carriage Return
(CR)
Examples:
Read the range configuration of the first channel
$0190(CR)
Command:
!013200(CR)
Response:
Ethernet Analogue DIO
Product Manual V1.2
$aa9n[CS](CR)
Read the range configuration of the fourth channel
Command:
Response:
© Copyright Brainboxes Ltd
$0193(CR)
!013100(CR)
Page 73 of 100
Advertisement
Table of Contents
