Table of Contents
Advertisement
$aaF
Applies to: All analogue input/output products
Description:
Command to read the firmware version on the device
Command Syntax:
Delimiter character
$
Address of the device in hexadecimal format (00 to FF)
aa
F
Command to read the firmware version
Checksum
[CS]
Carriage Return
(CR)
Response
:
!aa(Data)[CS](CR)
Valid Command:
?aa[CS](CR)
Invalid Command:
Delimiter for a valid command
!
?
Delimiter for an invalid command
Address of the device which responded
aa
Firmware version of the responding device.
(Data)
[CS]
Checksum
Carriage Return
(CR)
Examples:
Reads the firmware version of the device and shows it as version 3.65.
$01F(CR)
Command:
!013.65(CR)
Response:
Ethernet Analogue DIO
Product Manual V1.2
$aaF[CS](CR)
© Copyright Brainboxes Ltd
Page 76 of 100
Advertisement
Table of Contents
