Table of Contents
Advertisement
$aa8Ci
Applies to: ED-549
Description:
Command to read the full scale range configuration for the specified channel.
Command Syntax:
Delimiter character
$
Address of the device in hexadecimal format (00 to FF)
aa
Command to read channel range configuration
8
Command to specify the channel to read where i is the input channel
Ci
Checksum
[CS]
Carriage Return
(CR)
Response
:
!aaCiRrr[CS](CR)
Valid Command:
?aa[CS](CR)
Invalid Command:
Delimiter for a valid command
!
Delimiter for an invalid command
?
aa
Address of the device which responded
Channel read command
C
Specifies the channel that the data was read from where i is the channel
i
R
Type code command
Type code data from the specified channel where rr is the type code from the 'Range settings and
rr
data formats' table
Checksum
[CS]
(CR)
Carriage Return
Examples:
Read the range configuration of the first channel
$018C0(CR)
Command:
!01C0R09(CR)
Response:
Ethernet Analogue DIO
Product Manual V1.2
$aa8Ci[CS](CR)
Read the range configuration of the fourth channel
Command:
Response:
© Copyright Brainboxes Ltd
$018C3(CR)
!01C3R0B(CR)
Page 70 of 100
Advertisement
Table of Contents
