Table of Contents
Advertisement
I/O Lines page
Input I/O Lines page (ED-549)
The IO Lines page lists all the input lines on the device and allows you to change their settings and calibrate
them individually.
Please note: To overcome what would be a relatively long conversion latency between the time an input
channel value is requested and returned, the Analogue Input range perform Analogue to Digital conversions
continually across all enabled channels and so instantly return the latest value taken. The IO Lines webpage
can be used to disable any channels that are not in use will in turn make the refresh rate for the enabled
channels higher so giving a more up to date Analogue input value.
Channel Name
The channel name box allows you to give a name to each of the channels individually. The name given to each
of the channels will appear on the Home page of the web configuration pages in the IO status section.
Channel Enable
When the enable box is ticked then the channel is enabled and the value can be read from the channel. When
the channel is disabled there will be no value displayed on the IO Lines page or in the IO Status section of the
Home page.
Full Scale Range
The full scale range is the range of voltages or currents that the value will be displayed in.
Ethernet Analogue DIO
Product Manual V1.3
© Copyright Brainboxes Ltd
Page 47 of 100
Advertisement
Table of Contents
