Table of Contents
Advertisement
Restore Factory Calibration
The restore factory calibration button will erase any user calibration that has been applied to any of the
channels and restore the factory calibration on all channels.
Output I/O Lines page (ED-560)
The IO Lines page lists all the input lines on the device and allows you to change their settings individually.
Channel Name
The channel name box allows you to give a name to each of the channels. The name given to each of the
channels will appear on the Home page of the web configuration pages in the IO status section.
Full Scale Range
The full scale range is the range of voltages or currents that the output will range over.
Power-On Value
The Power-On Value drop down boxes determine what state the output lines will go to every time the device is
powered on. By default, all of the output lines will be set to the minimum output when the device is powered
on.
For example, if the drop down boxes are set like below...
...when the device is powered on with these settings, the output lines of the device will be...
Ethernet Analogue DIO
Product Manual V1.3
© Copyright Brainboxes Ltd
Page 50 of 100
Advertisement
Table of Contents
