Table of Contents
Advertisement
Remote Access
The Remote access feature of the ED devices allows access to the device over the internet or from a different
network. The device can be accessed either through the webpage interface, or through Boost.IO Manager. To
access the ED device remotely, you will need to set up port forwarding through the router which connects your
local network to the internet. If you need assistance setting up port forwarding on your network, contact your
network administrator.
Once you have the IP address and port forwarding numbers of the device and the ports, you can either access
the device through the webpage or add the device manually using Boost.IO Manager.
The ED devices store their settings in one place, inside the device. When accessing the device either from the
web configuration pages or using Boost.IO Manager, it will get and set the settings inside the device itself.
Therefore, if Boost.IO Manager is closed and a setting is updated using the web configuration pages, Boost.IO
won't know that any settings have changed until it is opened. When the application opens, it will automatically
get the settings of any installed devices.
Ethernet Analogue DIO
Product Manual V1.3
© Copyright Brainboxes Ltd
Page 37 of 100
Advertisement
Table of Contents
