~aaEv
Description:
Command to enable/disable device calibration
Command Syntax:
~
Delimiter character
aa
Address of the device in hexadecimal format (00 to FF)
Command to enable or disable the calibration
E
v
1: Enable calibration
0: Disable calibration
Checksum
[CS]
Carriage Return
(CR)
Response
:
!aa[CS](CR)
Valid Command:
?aa[CS](CR)
Invalid Command:
Delimiter for a valid command
!
?
Delimiter for an invalid command
Address of the responding device
aa
Checksum
[CS]
(CR)
Carriage Return
Examples:
Send a command to enable the device to be calibrated using the ASCII commands.
~01E1(CR)
Command:
!01(CR)
Response:
Send the command to disable device calibration.
~01E0(CR)
Command:
!01(CR)
Response:
Ethernet Analogue DIO
Product Manual V1.2
~aaEv[CS](CR)
© Copyright Brainboxes Ltd
Page 83 of 100