6. The driver for the device will be installed and, when complete, the icon in Boost.IO Manager will have
a blue tick next to it and the status will be 'Ready'.
7. There will now be a COM Ports section in the left panel which allows you to change the settings of the
installed COM Port such as baud rate and COM label. For details on how to do this please see the
COM Port Settings section.
COM Port Settings
To change the COM Port settings of an installed ED device, follow the steps below.
1. Open Boost.IO Manager, if it is not already open, by clicking the Boost.IO icon on your desktop.
2. Select the installed device which you want to configure by clicking on it.
3. In the left panel find the 'COM Ports' section and double click on the port which you want to
configure.
Ethernet Analogue DIO
Product Manual V1.3
© Copyright Brainboxes Ltd
Page 26 of 100