Table of Contents
Advertisement
#aan(Data)
Applies to: ED-560
Description:
Command to set the output value of channel n.
Command Syntax:
#
Delimiter character
Address of the device to be configured, in hexadecimal format (00 to FF)
aa
The channel to be read (0 to F)
n
(Value)
The value for channel n to be set to
Checksum
[CS]
Carriage Return
(CR)
Response
:
>[CS](CR)
Valid Command:
?aa[CS](CR)
Invalid Command:
Delimiter for a valid command
>
?
Delimiter for an invalid command
Checksum
[CS]
Carriage Return
(CR)
Ethernet Analogue DIO
Product Manual V1.2
~aa3n[CS](CR)
© Copyright Brainboxes Ltd
Page 62 of 100
Advertisement
Table of Contents
