Table of Contents
Advertisement
$aaS0
Description:
Command to perform internal calibration on the device.
Command Syntax:
$
Delimiter character
aa
Address of the device to be calibrated
Command to perform internal calibration
S0
[CS]
Checksum
(CR)
Carriage Return
Response
:
!aa[CS](CR)
Valid Command:
?aa[CS](CR)
Invalid Command:
Delimiter for a valid command
!
Delimiter for an invalid command
?
aa
Address of the responding device
Checksum
[CS]
Carriage Return
(CR)
Examples:
Send a command to perform internal calibration of the device and valid response is returned.
$01S0(CR)
Command:
!01(CR)
Response:
Note: There is no response from the device in three circumstances. If the command syntax is incorrect, there is
a communication error or if no device with the address in the command can be found.
Ethernet Analogue DIO
Product Manual V1.2
$aaS0[CS](CR)
© Copyright Brainboxes Ltd
Page 81 of 100
Advertisement
Table of Contents
