Display, Restore And Update Current And Factory Settings - Brainboxes RS232 Product Manual

The Currently configured partner device is shown (if
any). The user is then prompted to enter a new
partner device address.
To keep the same partner, or skip this option, press
the "Esc" key
The user is then prompted for a new PIN to be
entered. You can enter any characters you wish
here up to a maximum of 16 characters. You should
bear in mind that some devices have limited input
mechanisms and may not be able to use a full
character set.
Next the user is prompted to choose a role for the
device (the current one is identified). "s" chooses
Server, "c" chooses Client or "Esc" skips this section
leaving the current setting unchanged.
Lastly, the user is offered to change the converters
friendly name. Typing your chosen name followed
by "enter" will immediately alter the published name,
hitting the "Esc" key will skip this setting leaving the
current name unchanged.

4.2.6. Display, Restore and Update Current and Factory Settings

Selecting option 3 from the "Main Menu" menu
displays the Current Settings menu and allows the
user to display, change or restore the default
settings.
Manual for BL-521 5_3.doc © Copyright Brainboxes Limited 2004 Page 21 of 41