Nvr Controls Page - AMX SC-N8012 User Manual

NVR Controls Page

Click View > NVR Controls to access the page shown in
NVR Controls Page
FIG. 11
NVR Controls Option Descriptions
TABLE 6
Option
NVR drop-down
Mode drop-down
Playback drop-down
Channel drop-down
Loop checkbox
Playback controls
Recording link
NVR Copy link
MPEG link
N-Command User Manual
Figure
Description
Select an NVR from the list of discovered NVRs on your
network.
Select the NVR mode (N1000, N2000, N2400, N3000).
Select a recorded file stored on the selected NVR to play
back.
Select which stream to use for recording playback.
Enable this option to place the recording you are
playing back in a continuous loop (so it constantly
repeats).
Use these controls to start/stop/pause/navigate the
recording.
Recording Settings on page 17
Refer to
the options available from this link.
Refer to NVR Copy Settings on page 18
the options available from this link.
MPEG Settings on page 18
Refer to
options available from this link.
11. Options are described in
Notes
for details on
for details on
for details on the
Chapter 3: Configuration Options
Table 6.
16