Ansi/Sia Cp-01-2010 Features To Limit False Alarms - 2gig Technologies EDGE Installation Manual

Question
Question Text Available Settings
Number
CS lack of usage notification time, in
Q501 0- 255 Days
days (0- 255)
Q502 Periodic test, in days (0-255) 0-255 Days
Enabled
Q503 Programming mode entry reports to CS
Disabled
Enabled
Q504 Trouble reports to CS
Disabled
Enabled
Q505
Trouble restore reports to CS
Disabled
Enabled
Q506 Manual bypass reports to CS
Disabled
Enabled
Q507 Bypass restore reports to CS
Disabled
Enabled
Q508 Force bypass reports
Disabled
Enabled
Q509
AC loss reports to CS
Disabled
Enabled
Q510 AC restore reports to CS
Disabled
Enabled
Q511 System low battery reports to CS
Disabled
Enabled
Q512 System low battery restore reports to CS
Disabled
Enabled
Q513 RF low battery reports
Disabled
Enabled
Q514 Sensor low battery restore reports to CS
Disabled
Enabled
Q515 System disarmed reports to CS
Disabled
Enabled
Q516 System armed reports to CS
Disabled
Enabled
Q517
Alarm restore reports to CS
Disabled
Enabled
Q518 Smart test reports
Disabled
2GIG EDGE Installation Guide
Factory Default Programming
Page Reference
Setting Category
7 Days Reporting 52
30 Days Reporting 53
Disabled Reporting 53
Enabled Reporting 53
Enabled Reporting 53
Disabled Reporting 53
Disabled Reporting 53
Disabled Reporting 53
Enabled Reporting 54
Enabled Reporting 54
Enabled Reporting 54
Enabled Reporting 54
Enabled Reporting 54
Enabled Reporting 54
Disabled Reporting 54
Disabled Reporting 54
Disabled Reporting 55
Disabled Reporting 55
64

ANSI/SIA CP-01-2010 Features to Limit False Alarms

For compliance with ANSI/SIA CP-01-2010: Control Panel Standard - Features for False Alarm Reduction, the installer can set a variety of
different options designed to limit occurrences of a False Alarm.
ANSI/SIA CP-01-2010 2GIG System Feature
4.2.2.1 Exit Time Exit Delay
4.2.2.2 Progress Annunciation Exit Delay Announcement
4.2.2.3 Exit Time Restart Exit Delay Restart
4.2.2.4 Exit Error Exit Error
4.2.2.5 Unvacated Premises Auto Stay
4.2.3.1 Entry Delay Entry Delay
4.2.3.2 Progress Annunciation Entry Delay Announcement
4.2.3.3 Disarm Disarming Features
4.2.4.1 Control Buttons Keyfob/Remote Arming Mode on System Not Ready.
4.2.4.2 Manual Alarms Emergency Alarm Features
Alert Keyfob Disarming After Alarm
4.2.4.3 System Acknowledgment
Keyfob Arm/Disarm Confirmation
4.2.4.4 Remote Arming Key Fob Arming
4.3.4.5 Remote Disarming Key Fob Arming
4.2.5.1 Abort Window Abort Window Dialer Delay
4.2.5.1.1 Disarm Abort Window Dialer Delay
4.2.5.1.2 Abort Abort Window Dialer Delay
4.2.5.2 Alarm Transmission Abort Window Dialer Delay
4.2.5.3 Disarm Disarm
4.2.5.4 Cancel Window Alarm Cancel Time, Alarm Cancel Display
4.2.6.1 Use of Duress Feature User Duress Report
4.2.6.2 Duress Code Duress Code
4.2.7 Initiation of Manual Alarms Panic, Fire, or Emergency Alarm
4.3. Cross Zoning Cross Sensor Zones, Cross Sensor Timeout
4.3.2 Swinger Shutdown Swinger Shutdown Count (1-6)
4.3.3 Fire Alarms Fire & Carbon Monoxide Protection
Console Test
4.6.3 System Test
Sensors Test
Installation & Programming Guide
"Q201: Exit delay, in seconds (45-120)"
"Q116: Allow quick exit"
"Q201: Exit delay, in seconds (45-120)"
"Q115: Exit delay restart"
See the 2GIG EDGE User Guide
"Q114: Auto stay"
"Q202: Entry delay 1, in seconds (30-240)"
"Q203: Entry delay 2, in seconds (30-240)"
"Q101: Enter installer code (4 or 6 digits)"
See the 2GIG EDGE User Guide
"Q121: Keyfob/remote arming mode on system not ready"
See the 2GIG EDGE User Guide
"Q119: Alert on disarm with keyfob after alarm"
"Q120: Keyfob arm/disarm confirmation"
"Q119: Alert on disarm with keyfob after alarm"
"Q120: Keyfob arm/disarm confirmation"
"Q205: Alarm abort window transmission delay"
"Q502: Periodic test, in days (0-255)"
"Q502: Periodic test, in days (0-255)"
"Q205: Alarm abort window transmission delay"
See the 2GIG EDGE User Guide
"Q204: Alarm cancel time, in minutes (5-255)"
"Covert Distress Signal"
"User Duress Pin"
See the 2GIG EDGE User Guide
"Q123: Cross sensor zones 99-100"
"Q209: Cross sensor timeout, in seconds (10-120)"
"Q208: Swinger shutdown count (1-6)"
"Q517: Alarm restore reports to CS"
"Sensor Type — 24-Hour Fire"
"Sensor Type — 24-Hour Fire Verification"
"Testing the System"
Copyright © 2021 Nortek Security & Control LLC
65