2gig Technologies EDGE Installation Manual page 20

Transmission Delay
1 . Tap Transmission Delay.
2 . Tap Enabled or Disabled.
3 . Tap t to move to the next option.
Sensor Reports
1 . Tap Sensor Reports.
2 . Tap Enabled or Disabled.
3 . Tap t to move to the next option.
Sensor Supervised
1 . Tap Sensor Supervised.
2 . Tap Enabled or Disabled.
Reset Keypad/Next Keypad
➣ Tap RESET ZONE to erase all the programmed settings for the zone.
➣ Tap NEXT ZONE to program another Image Sensor.
P P – n s
anel rogramming etWorK ettings
Wireless Network
1 . Tap an available Wireless Network Name.
2 . Correctly enter the assigned network password to connect.
3 . Tap  to go back to the Network Settings menu.
4 . Enter network password at the Keyboard Entry Screen, and
tap CONNECT.
2GIG EDGE Installation Guide
38
Forget Network
Tapping FORGET NETWORK disconnects the 2GIG EDGE Panel from the wireless
network and erases the password so that it will not automatically reconnect to
the network.
Join Other Network
Tapping Join Other Network allows you to join a network not shown in the list.
1 . Return to the Wireless Network screen.
2 . Tap JOIN OTHER NETWORK.
3 . Enter the wireless network name, then tap NEXT.
4 . Select the Security Type and Security Mode, then tap NEXT.
5 . Enter the password.
WPS
Tapping WPS allows you to connect securely to routers that support WPS.
1 . Tap WPS on 2GIG EDGE Panel.
2 . Tap Connect.
3 . Locate and press the WPS on your router. 2GIG EDGE Panel will securely
connect with the router.
4 . Once Authorization is successful, tap ACCEPT.
Copyright © 2021 Nortek Security & Control LLC
39