Updating Your Matrox Extio 3 Firmware (Networked Mode) - Matrox Extio 3 Series User Manual

Updating your Matrox Extio 3 firmware (networked mode)

Note:
matches the version of the Matrox Extio Central Manager software package installed on
your controller system.
Download and extract the firmware package
1
Download the latest firmware package and extract the files to a local folder on your system
(for example, C:\Extio3FirmwareUpdate).
Run the Updater Over Network file
2
Browse to the folder containing the extracted files, then run the UpdaterOverNetwork.exe file.
Search for available Extio 3 devices or locate your Extio 3 device
3
using the IP address
Automatic detection – To search for the Extio 3 devices on your subnet, select
detection
To start searching for devices, click
Manual detection – If devices aren't
automatically detected, you can manually
locate one or more Extio 3 devices using
their IP address. To manually locate the
devices, select
Address or URL
Extio 3 device you want to locate.
If you're entering multiple addresses,
separate each address with a space. (You can
also enter the addresses or URLS by clicking
the browse button (
address per line.)
When you're done entering the addresses or
URLs, click
changes made, click
To start searching for devices, click
To stop searching for devices, click
If you're using networked mode, make sure the version of your firmware package
.
Manual detection
enter the IP address of each
) and entering one IP
. To discard the last
Apply
.
Cancel
.
Search
, and next to
.
Search
. To resume searching for devices, click
Stop
Matrox Extio 3 Series – User Guide 45
Automatic
again.
Search