Hardware Required (Sold Separately); Optional Hardware (Sold Separately); Matrox Rack Mount Kit - Matrox Extio 3 Series User Manual

* The On-Screen Display (OSD) is available only on the receiver.

Hardware required (sold separately)

Depending on your device and setup, you may need the following hardware:
 CAT5e, CAT6, or CAT7 cable
 LC-LC fiber optic cable
 Shielded DisplayPort™ 1.1 or 1.2 cable

Optional hardware (sold separately)

You may also need any of the following hardware:
 Multi-mode fiber optic transceiver
 Single-mode fiber optic transceiver
 Mini DisplayPort to DisplayPort adapter
 Analog audio cable
 Matrox secure cable solution

Matrox rack mount kit

Matrox makes available a rack mount kit to mount your Extio devices. To purchase a Matrox rack
mount kit, contact your Matrox representative.
* Shielded DisplayPort™ 1.2 cable is required for 4K60 resolutions.
† To purchase a multi-mode fiber optic transceiver (part number XTO3-SFPMM) or single-mode fiber optic transceiver (part
number XTO3-SFPSM) for your Matrox product, contact your Matrox representative.
‡ Not recommended for 4K60 resolutions.
10 Matrox Extio 3 Series – User Guide
 Multi-mode (62.5/125 µm (OM1), 50/125 µm (OM2, OM3, or OM4))
 Single-mode (9/125 µm (OS1 or OS2))
*
†
†
‡