Updating Your Matrox Extio 3 Firmware (Networked Mode) - Matrox Extio N3408 User Manual

Updating your Matrox Extio 3 firmware (networked mode)

Note:
matches the version of the Matrox Extio Central Manager software package installed on
your controller system.
Download and extract the firmware package
1
Download the latest firmware package and extract the files to a local folder on your system
(for example, C:\Extio3FirmwareUpdate). If you don't select a local folder, the files will
automatically extract to C:\Matrox.
Run the Updater Over Network file
2
Browse to the folder containing the extracted files, then run the UpdaterOverNetwork.exe file.
Scan for available Extio 3 devices or locate your Extio 3 device
3
using the IP address
Automatic detection – To scan for Extio 3
devices on your subnet, select
detection
Manual detection – To locate one or more
Extio devices using their IP address, select
Manual detection
addresses
device you want to locate. If you're entering
multiple addresses, separate each address
with a space. (You can also enter the IP
addresses by clicking the browse button
( ) and entering one IP address per line.)
When you're done entering the IP addresses,
click
Apply
To stop searching for devices, click
searching for devices, click
If you're using networked mode, make sure the version of your firmware package
Automatic
, then click .
Search
, and next to
enter the IP address of each Extio
.
Stop
again.
Search
IPv4
. To resume
Matrox Extio 3 Series – User Guide 29