Matrox Extio 3 Series User Manual page 57

c When you're done, click
On the tab, next to
2
Sources
3 Next to
Layout name
Select your video streams:
4
If you want to enable a display to show dynamic sources, click the box representing
a
the display in the aggregate layout under
one display to show dynamic sources).
b Click a video stream (tile) from the left-hand box and drag it into the proper display
under
Add video streams
layout.
When you're done, click
c
Connect to the aggregate. While the other display boxes show a thumbnail of the
d
selected video stream, the dynamic sources display box will appear dark since the
dynamic input is not yet selected.
.
OK
Aggregator mode
, enter a name for your monitor layout.
. Repeat this for every stream you want to add to your
.
Apply
, click
Configure.
(you can assign only
Add video streams
Matrox Extio 3 Series – User Guide 57