Connector
LAN1
LAN2
Line In
Line Out
Microphone
RS232
USB 2.0
Extio N3208 transmitter or receiver unit
Extio N3208 transmitter unit (Front)
Description
Connect an RJ45 cable to this connector.
Note:
If you're using link redundancy, make sure the
connectors are connected before enabling the
LAN2
feature.
redundancy
Connect an SFP module (RJ45 cable or LC-LC fiber optic cable)
to this connector. For more information,
module", page
Note:
If you're using link redundancy, make sure the
connectors are connected before enabling the
LAN2
feature.
redundancy
Connect the
Line Out
another audio device (local or remote) to this connector. This
connector supports a 3.5 mm stereo jack.
Connect the
Line In
another audio device (local or remote) to this connector. This
connector supports a 3.5 mm stereo jack.
Connect your microphone to this connector. This connector
supports a 3.5 mm stereo jack.
Control an RS232 device on one of your devices with an RS232
controller connected to device, or with an RS232 controller
sending commands over the network.
If your RS232 device has a DB25 connector, use a DE9 (also
known as a DB9) to DB25 converter to connect your device to
this connector.
Connect a USB device to this connector.
Video Out
(DisplayPort 1.1)
36.
connector of your computer (host) or of
connector of your computer (host) or of
USB 2.0
Matrox Extio 3 Series – User Guide 33
and
LAN1
Link
see "Installing the SFP
and
LAN1
Link