Accessing The Osd (On-Screen Display); Using The Osd (On-Screen Display) - Matrox Extio 3 Series User Manual

 Windows 7 – Click
Manager
configuration of Windows, this part may not be necessary.)
Configuring Extio Central Manager software
Before you can access and use the OSD, your Extio Central Manager software must be configured. For
information on how to use and configure Extio Central Manager software, see the Matrox Extio
Central Manager User Guide.

Accessing the OSD (On-Screen Display)

Note:
Extio 3 administrator. For more information, contact your network administrator.
The OSD is available only with Extio 3 receiver devices. To access the OSD, enter the OSD keyboard
shortcut on the keyboard connected to your receiver. The default keyboard shortcut is the [Scroll
Lock] key.
Changing the OSD keyboard shortcut
You can change the keyboard shortcut used to access the OSD.
Change the keyboard shortcut through Extio Central Manager. For more information, see your
Matrox Extio Central Manager User Guide.
Enabling VPN mode
Note:
from networked mode or point-to-point mode to VPN mode), you need to perform a
configuration reset of your devices. For more information,
mode of your devices", page

Using the OSD (On-Screen Display)

If your devices are networked, the OSD enables you to log into your receiver and switch to different
transmitters.
64 Matrox Extio 3 Series – User Guide

Start
*

Matrox Extio Central Manager
To access the OSD, make sure you obtain a user name and password from your
To change the operation mode of your Extio 3 configuration (for example, changing
79.
(or
All Programs Programs
. (* Depending on your version and
) 
Matrox Extio Central
see "Changing the operation