Product Information; Hardware Specifications - Matrox Extio 3 Series User Manual

Product information

Hardware specifications

Extio 3 transmitter card
Product type
Form factor
Video input connectors
DisplayPort 1.1
DisplayPort 1.2
Color space
Networking interface
SFP cage
RJ45 copper transceiver
SFP fiber module
Power consumption
†
Laser emissions
Regulatory compliance
Electrical safety considerations
* DisplayPort version 1.2 is supported on connector labeled
† Only when using a multi-mode SFP module.
Extio N3408 transmitter card
PCIe ×16 card
(×8 electrical and mechanical,
×16 mechanical)
Full height, ¾ length
4× Mini DisplayPort


*
YUV 4:4:4
RGB 8:8:8
1000 Base-T Ethernet


Optional
41W
850 µm laser compliant to 21CFR, Subpart J, Class 1
Class A: CE, FCC, ICES-3, KC, RCM, VCCI
The card d.c. input is to be separately approved with Reinforced
Insulation to MAINS, and power to the card is to be limited to
The card must only be installed and operated in a system meeting
the fire enclosure requirements of the IEC/CAN/CSA-
C22.2/ANSI/UL 62368-1 and IEC/CAN/CSA-C22.2/ANSI/UL
60950-1 safety standards.
L'accès CC de la carte doit être approuvé séparément avec une
isolation renforcée au SECTEUR et la puissance fournie à la carte
doit être limitée à 250 VA.
La carte doit seulement être installée et utilisée dans un système
qui rencontre les exigences liées aux enveloppes ignifuges des
normes de sécurité IEC/CAN/CSA-C22.2/ANSI/UL 62368-1 et
IEC/CAN/CSA-C22.2/ANSI/UL 60950-1.
only.
4
Extio N3208 transmitter card
PCIe ×16 card
(×8 electrical and mechanical,
×16 mechanical)
Full height, ¾ length
2× Mini DisplayPort

—
YUV 4:4:4
RGB 8:8:8
1000 Base-T Ethernet


Optional
32.5W
250 VA.
Matrox Extio 3 Series – User Guide 83