Accessing The Osd (On-Screen Display) - Matrox Extio 3 Series User Manual

Installing Matrox Extio Central Manager software
To install the software for your Extio 3 product, run the installation program for your software
package on any system on the network. Follow the on-screen instructions.
Note: Only one (1) instance of Extio Central Manager software needs to be installed.
Accessing Extio Central Manager software
Windows 10/7 – To access the main interface of Extio Central Manager software:
 Windows 10 – Click
Central Manager
necessary.)
Windows 7 – Click

Manager
configuration of Windows, this part may not be necessary.)
Configuring Extio Central Manager software
Before you can access and use the OSD, your Extio Central Manager software must be configured. For
information on how to use and configure Extio Central Manager software, see the Matrox Extio
Central Manager User Guide.

Accessing the OSD (On-Screen Display)

Note:
Extio 3 administrator. For more information, contact your network administrator.
The OSD is available only with Extio 3 receiver devices. To access the OSD, enter the OSD keyboard
shortcut on the keyboard connected to your receiver. The default keyboard shortcut is the [Scroll
Lock] key.
Changing the OSD keyboard shortcut
You can change the keyboard shortcut used to access the OSD.
Change the keyboard shortcut through Extio Central Manager. For more information, see your
Matrox Extio Central Manager User Guide.

Start
. (* Depending on your configuration of Windows, this part may not be

Start
* 
Matrox Extio Central Manager
To access the OSD, make sure you obtain a user name and password from your
* 
All apps Matrox Extio Central Manager
(or
All Programs Programs
. (* Depending on your version and
Matrox Extio 3 Series – User Guide 51
* 
Matrox Extio
)

Matrox Extio Central