Matrox Extio 3 Series User Manual page 59

To switch to a different source:
Open the on-screen-display (OSD) and click the
1
keyboard shortcut to go directly to the
source streams from the accessible transmitter units. Each source is shown with its
preview image, the friendly name of the transmitter, and the source input number. If a
transmitter has only a single available source, the input number is omitted.
Select a target stream. (To find a specific stream from a large list, use the search box on
2
top to filter.)
To switch to the transmitter associated with the stream, click
3
the target stream). The selected stream is now displayed on the monitor assigned with
dynamic sources.
Dynamic sources
tab). This tab contains all the
Dynamic sources
Connect
Matrox Extio 3 Series – User Guide 59
tab (or, you can use the
(or, double-click