Enabling Link Redundancy; Disabling Link Redundancy - Matrox Extio 3 Series User Manual

Enabling link redundancy

To enable link redundancy:
Connect the second network cable to your device
1
page
Enable the
2
3 For the changes to take effect, your devices will automatically reboot.

Disabling link redundancy

To disable link redundancy:
Disconnect the second network cable
1
Make sure your devices are detected on the network.
2
3 Disable the
28).
Enable link redundancy
Networked mode – In Extio Central Manager software, select your Extio device,

click , and then enable the
Network
information, see your Matrox Extio Central Manager User Guide.
Point-to-point mode – In the OSD, click

option
link redundancy
Enable link redundancy
 Networked mode – In Extio Central Manager software, select your Extio device,
click , and then disable the
Network
information, see your Matrox Extio Central Manager User Guide.
 Point-to-point mode – In the OSD, click
option. For more information,
link redundancy
page 75.
(see "Connecting your Extio 3 devices",
option in your Matrox software:
Enable link redundancy
More options
(see "Input and output information", page
(see "Connecting your Extio 3 devices", page
option in your Matrox software:
Enable link redundancy
More options
Matrox Extio 3 Series – User Guide 39
option. For more
, and then enable the
75).
option. For more
, and then disable the
see "Input and output information",
Enable
28).
Enable