Matrox Extio 3 Series User Manual page 58

e
Configure the analog audio source for your streams by selecting the proper options for
5
your
"Appendix D – Configuring your audio settings", page
When you're done, click
6
Editing the video streams in your monitor layout
To change the video streams in your current monitor layout:
In your current configuration, click
1
2 On the
Change your new monitor layout, then click
3
Click the
4
for your streams.
When you're done, click
5
You can remove a video stream from your monitor layout by doing one of the following:
 Right-clicking the video stream in the layout.
Dragging the video stream and dropping it anywhere outside of the layout.

Removing a layout
To remove a layout:
From the list of
1
Next to
2
When prompted, click
3
Switching between dynamic sources
You can change the dynamic source as frequently as you like.
58 Matrox Extio 3 Series – User Guide
Select your stream from the
and tabs, then click
Receiver
For more information, see
selected stream.
page 58.
, , and
Headphone Line Out
Note: Extio Central Manager – Doing
already configured through Extio Central Manager software. If audio was
already configured through Extio Central Manager, skip this step.
Apply
tab, next to
Sources
tab. Change your video streams and configure the analog audio source
Sources
Apply
, select the aggregator mode layout (
Sources
, click
Aggregator mode
to permanently remove the layout.
OK
tab that appears between the
Dynamic sources
Connect to connect to the transmitter associated with the
"Switching between dynamic sources",
Source destination
step 5
.
 .
Cancel Yes
, click
Aggregator mode
.
OK
.
.
Remove
options. For more information,
96.
may overwrite the audio settings
.
Edit
) you want to remove.
Sources
see