Appendix 1 - Connection Overview; Matrox Avio F125 - Matrox Avio F125 User Manual

Appendix 1 – Connection overview

Matrox Avio F125

Host connections
7
Dedicated USB connections are
only required if, when starting,
your host computer can't detect a
USB keyboard or mouse on your
transmitter or receiver unit.
PS/2 connectors
Mouse and keyboard PS/2
connectors at the front of your
transmitter and receiver units are
supported only if the system is
connected to the mouse and
keyboard PS/2 connectors at the
6
DVI-D
Dedicated USB connections
Main USB connection
3
4
LC-LC Duplex
fiber optic cable
2
Optional local
Local connections on your transmitter unit are
optional and are similar to the ones supported on
your receiver unit.
Front
Transmitter
Back
12 VDC
2.5A Max
12 VDC
2.5A Max
Back
Receiver
Front
Connection setup
Connect your monitors to your units.
1
Connect your keyboard and mouse to
2
your units.
Connect your fiber optic cable.
3
Connect the USB cable to your host
4
system and your transmitter unit (main
USB connection).
5 Connect the power supply of your units.
6 Connect the graphics hardware of your
host system to your transmitter unit.
Note: This connector doesn't support
USB 3.0 connections. You must use USB
2.0 connections.
5
7 Turn on your host system.
5
1
Matrox Avio Series – User Guide 31