Matrox Extio 3 Series User Manual page 65

Basic functions
Logout
Search
Configure aggregator mode
Wake-on-LAN
Rescan network
Disconnect
Connect
Get logs
Close
Click this to log out of the device.
Search for a system by device serial number, friendly name,
IP address, or name of the user connected.
Use this to your aggregator mode layout, streams,
Configure
and audio configuration. You can also
configuration. For more information,
in VPN", page 69.
Click this to wake up your transmitter if it turns off. This has
no effect if a transmitter isn't detected.
Click this to discover devices outside of the receiver's subnet
or unicast network.
Click this to disconnect from a transmitter.
Click this to connect to a new transmitter.
Click this to get detailed logs for troubleshooting.
Click this to close the OSD.
and
Edit Remove
see "Aggregator mode
Matrox Extio 3 Series – User Guide 65
your