Installing Matrox Extio Central Manager Software - Matrox Extio 3 Series User Manual

 Windows Server 2016 and Windows Server 2008 R2 – Make sure the SSDP Discovery
service, network discovery, and file sharing options are enabled.
 Review the safety information provided. For more information,
information", page
Software available in networked mode
 Extio Central Manager
On-Screen Display (OSD)


Installing Matrox Extio Central Manager software

Matrox Extio Central Manager software enables you to remotely manage, monitor,
and configure your networked Extio 3 devices.
Supported operating systems
Matrox Extio Central Manager supports the following operating systems: Windows® Server® 2016,
Windows® 10 (64-bit), Windows® Server® 2008 R2, and Windows® 7.
Obtaining Matrox Extio Central Manager software
To obtain the latest Extio Central Manager software, contact your Matrox representative. Matrox
makes the latest Extio Central Manager software available on the Matrox web site
(www.matrox.com/extio3/software).
Installing Matrox Extio Central Manager software
To install the software for your Extio 3 product, run the installation program for your software
package on any system on the network. Follow the on-screen instructions.
Note: Only one (1) instance of Extio Central Manager software needs to be installed.
Accessing Extio Central Manager software
Windows 10/7 – To access the main interface of Extio Central Manager software:
 Windows 10 – Click
Central Manager
necessary.)
6.
 * 
Start All apps
. (* Depending on your configuration of Windows, this part may not be
Matrox Extio Central Manager
Matrox Extio 3 Series – User Guide 63
see "Matrox safety
* 
Matrox Extio