Before You Begin; Connection Overview; Avio F120 Transmitter - Front - Matrox Avio F120 Series User Manual

Before you begin

A Duplex LC-LC fiber optic cable is required.
Your Avio units provide the link between your host system and your monitor, keyboard,
and mouse. Before you turn on your host system, connect your transmitter unit to your
host system; connect your receiver unit to your transmitter unit; connect your monitors,
keyboard, mouse, and other devices to your units; then turn on your devices and units.
Monitors connected to the connectors labeled
use the same display and monitor settings. This also applies to monitors connected to
connectors labeled

Connection overview

This section describes the connectors on your Avio F120 transmitter and receiver units. For more
information on the OSD (On-Screen Display) controls of your Avio units,
product", page 14.
Avio F120 Transmitter – Front
USB HID USB 2.0
(local) (local)
8 Matrox Avio Series – User Guide
.
PS/2 keyboard (local)
PS/2 mouse (local)
on the transmitter and receiver units
see "Configuring your Avio
Line-in
(local)
Microphone
(local)
Headphones Line-out
(local) (local)