Connecting your Expander unit
Note:
This section describes how to connect an Expander unit (sold separately) to your Extio unit.
Connecting an Expander unit to your Extio unit enables you to support four additional monitors.
Note:
unit, you need to uninstall and reinstall your Matrox software.
Connection overview
Back – Extio F2408E Expander
Power connector
Step-by-step connection setup
Connect your Expander unit to
1
your Extio unit
Connect one end of the optical cable
provided with your Expander unit to the
optical connector labeled
Extio unit.
Connect the other end of your cable to the
optical connector labeled
Expander unit. Make sure your connectors
are properly connected.
18 Matrox Extio Series – User Guide
You can connect an Extio F2408E Expander unit only to an Extio F2408 unit.
When changing your hardware configuration by adding or removing an Expander
Monitor connectors
(DisplayPort)
Port 2
Port 3
on your
on your
Note:
Labeling on the fiber optic cable is for
clarity. Actual labeling may differ.
Optical
connector
Optical
cable