Quiet Mode; Errors And Warnings; Unit Number; Filter Auto Clean - Daikin BRC1H81W7 Installer And User Manual

14 About the app
Operation
Home screen
Main menu

14.5.29 Quiet mode

Set a timespan in which the outdoor unit operates more quietly.
INFORMATION
The availability of this function depends on the type of
outdoor unit.

14.5.30 Errors and warnings

Consult the error history, and temporarily enable/disable the pushing
of error and/or warning notifications.
The pushing of error and warning notifications is by default enabled.
Disable "Display errors" and "Display warnings" to prevent the
system from pushing error and warning notifications for 48 hours.
After 48 hours, "Display errors" and "Display warnings" become
automatically enabled again.

14.5.31 Unit number

Change the unit number of the indoor unit(s). To configure individual
indoor units, these units require a unit number. The unit number of
an indoor unit is its ranking in the list. To give a unit a new unit
number, change its ranking by either moving it to an empty slot, or
switching it with another indoor unit. If you need help identifying
physical indoor units, tap an indoor unit's fan icon to make that
indoor unit's fan operate.

14.5.32 Filter auto clean

INFORMATION
To use this function, it is required that the indoor units are
equipped with a self-cleaning decoration panel (optional
accessory).
Enable automatic indoor unit filter cleaning operation and set a
timespan for it.
Installer and user reference guide
42
Remote controller
When you lock functions/buttons
that are operated from the
controller home screen, the
controller will display a lock
screen when you try to use these
functions/buttons.
When you lock functions that are
main menu items on the
controller, these functions get
crossed out in the main menu,
and accompanied by a lock icon.
When locking operation modes,
the controller simply omits them
from the operation mode menu.
Reset dustbox maintenance timer
When it is time to empty the self-cleaning decoration panel's
dustbox, the app displays a notification in the operation screen.
Empty the dustbox and reset the notification.

14.5.33 Filter notifications

Dismiss notification
The app displays a notification in the operation screen when it is
time to perform one of the following filter-related maintenance
activities:
▪ Replacement of indoor unit filter.
▪ Cleaning of indoor unit filter.
▪ Cleaning of indoor unit element.
Perform the required maintenance, then dismiss the notification.
INFORMATION
For more information on indoor unit maintenance, see the
operation manual of the indoor unit.
Reset notification timer
Filter maintenance due time is controlled by timers. The app sends
out a maintenance notification each time a timer expires. It is
possible to reset these timers.
INFORMATION
To use this function, it is required that you use the app in
installer mode. For instructions on how to activate installer
mode, see "14.3 Installer mode" on

14.5.34 AirNet address

Assign AirNet addresses to the indoor and outdoor units, this to
connect the system to the AirNet monitoring and diagnostics system.
First select a unit by way of its unit number, then assign it an AirNet
address.

14.5.35 Group address

Assign addresses to the indoor units, this to control the system with
central control equipment. You can assign an address to the group
of indoor units connected to the controller, and to indoor units
individually.

14.5.36 Field settings

Make indoor unit and remote controller field settings. For an
overview of possible field settings, see
page 25 and "Remote controller field settings" on
Setting procedure
Field settings are composed of the following components:
▪ Modes
▪ Units
▪ Settings
▪ Values
The field settings procedure differs depending on whether you are
making settings for individual indoor units or for groups of indoor
units, or for the remote controller.
page 35.
"Indoor unit field settings" on
page 26.
BRC1H81W+S7
Wired remote controller
4P513690-1C – 2019.05