Setting And Enabling The Dome Password - American Dynamics SpeedDome Ultra 8 Operator's Manual

4. Select Exit to return to the Dome Configuration Menu.

Setting and Enabling the Dome Password

To prevent unauthorized use of the configuration utility, you may choose to enable password
protection. There are two parts to using passwords with your dome: setting a password and
enabling password use. The dome password can be from 1 to 8 characters long. The characters
available depend on the current language setting.
Setting or Changing the Dome Password
1. Select Language/Password from the Dome Configuration Menu.
2. Select Set Password.
The Set Password screen appears.
SPEEDDOME ULTRA 8 CONFIGURATION UTILITY
OPERATOR'S GUIDE
Figure 72. Change Language screen
Change Language
Please Wait
Note: Changing the language does not alter any previously programmed names.
Only default names, such as Preset 1, change to the new language setting
85 of 140
8200-0600-01, REV. B