Appendix B: Manchester Command Summary; Command Summary - American Dynamics SpeedDome Ultra 8 Operator's Manual

Appendix B: Manchester Command Summary

This appendix summarizes the Manchester controller commands used with the Configuration
Utility. It also provides a list of additional Manchester commands that can be used with the
dome and compatible controllers.

Command Summary

The following table lists the commands to operate the configuration utility when the dome is
installed in a Manchester environment. The keyboard must be in programming mode to
perform these functions.
If you want to ...
Start the configuration utility.
Move the highlight bar on the active menu.
Select the highlighted item on the active menu.
Increase the value of the selected setting. For example, Red or
Blue white balance values.
Decrease the value of the selected field. For example, Red or
Blue white balance values.
Display the next choice for the setting. For example,
Maximum Zoom setting.
Display the previous choice for the setting. For example,
Maximum Zoom setting.
Save changes and exit the utility from any screen.
1
The label may read Set Shot on some keyboards.
Setting Names / Working with Passwords
When setting names or entering password information, the screen displays the available
characters in the selected languages. In these situations, the following commands are used:
If you want to ...
Move the highlight left or right in the character field.
Move the highlight up or down in the character field.
Select the highlighted character in the character field.
Move the cursor to the right of the current character in the
name or password.
Move the cursor to the left of the current character in the
name.
SPEEDDOME ULTRA 8 CONFIGURATION UTILITY
OPERATOR'S GUIDE
103 of 140
Use ...
66, then press
1
Set Preset
Pan/Tilt
Focus
Zoom In
Zoom Out
Zoom In
Zoom Out
Iris Close, then Focus
Use ...
Pan
Tilt
Focus
Zoom In
Zoom Out
8200-0600-01, REV. B