Viewing Dome Model Information - American Dynamics SpeedDome Ultra 8 Operator's Manual

•
(All dome models) Select Dome Model to display basic dome information (Figure 77 on
page 89).
• (All dome models) Select Dome Statistics to display additional information (Figure 78
on page 89).
•
(Indoor and outdoor domes only) Select Init IO Flash to update the IO board flash
memory (Figure 79 on page 90)
• (Indoor and outdoor domes only) Select Calibration to display the camera calibration
screens (Figure 81 on page 92).
•
(Outdoor domes only) Select Base IO Status to display base IO operating conditions and
status (Figure 83 on page93).
• (Outdoor domes only) Select Base IO Control to display the base IO firmware version,
enable firmware updates, and control the camera dome blower and heater (Figure 84 on
page 94).
• Select Exit to return to the Dome Configuration Menu.

Viewing Dome Model Information

(All dome models) The Dome Model screen provides basic dome information that includes the
dome model and type, mnemonic, software and FPGA versions, serial number, and
manufacture date.
SPEEDDOME ULTRA 8 CONFIGURATION UTILITY
OPERATOR'S GUIDE
Figure 76. Dome Information screen–camera domes with legacy IO boards
DOME INFORMATION
DOME MODEL
DOME STATISTICS
EXIT
88 of 140
8200-0600-01, REV. B