American Dynamics SpeedDome Ultra 8 Operator's Manual page 94

1. When Calibration is selected from the Dome Information screen, the following screen
is displayed and prompts you to enter a password.
2. Enter the correct password (135246) from the keyboard, select Exit, and then press
Focus Far. The calibration screen (Figure 82) is displayed, which allows you to define
and set the camera's zero-reference point.
3. Use the crosshair (looks like a plus symbol) in the middle of the screen to position the
camera on the zero reference point (target), and then press Focus Far to set the
calibration reference point. The Dome Information screen is then redisplayed.
SPEEDDOME ULTRA 8 CONFIGURATION UTILITY
OPERATOR'S GUIDE
Note: This feature is only applicable to the Indoor Housing IO board:
P/N 0312-3006-01, and the Outdoor Housing IO board: P/N 0311-0124-xx.
Figure 81. Calibration password screen
CALIBRATION
Note: The password, 135246, cannot be changed.
92 of 140
PASSWORD:
0123456789
EXIT
8200-0600-01, REV. B