American Dynamics SpeedDome Ultra 8 Operator's Manual page 102

AD2150/AD2350
Supported Protocol
Maximum Presets
(4)
Maximum Patterns
DirectSet Menu
Address Range
Notes:
(1) Requires the AD2083-02 series code converter.
(2) Preset information is stored at the converter, not the
dome.
(3) Requires AD2083-02 with firmware version 0701-
11YB-156A or newer. Preset information is stored in
the dome, not the converter.
(4) Patterns are limited by time and the number of
available dome commands. Total time for each
pattern cannot exceed 6 minutes 50 seconds. Total
dome commands used in all patterns cannot exceed
99.
AD1650
Supported Protocol
Maximum Presets
(4)
Maximum Patterns
DirectSet Menu
Address Range
Notes:
(1) Requires the AD2083-02 series code converter.
(2) Preset information is stored at the converter, not the
dome.
(3) Requires AD2083-02 with firmware version 0701-
11YB-156A or newer. Preset information is stored in
the dome, not the converter.
(4) Patterns are limited by time and the number of
available dome commands. Total time for each
pattern cannot exceed 6 minutes 50 seconds. Total
dome commands used in all patterns cannot exceed
99.
(5) Requires additional equipment to achieve these
numbers. A dome address within each group of 64 or
99 cameras is reserved as a global broadcast address.
SPEEDDOME ULTRA 8 CONFIGURATION UTILITY
OPERATOR'S GUIDE
(1)
RS-422
(2) (3)
16 or 60
3
Not supported
1-32
(1)
RS-422
(2) (3)
16 or 60
3
Not supported
(5)
1-128
AD168
Supported Protocols
Maximum Presets
Maximum Patterns
DirectSet Menu
Address Range
Notes:
(1) Requires the appropriate code control module.
(2) Requires the AD2083-02 series code converter.
(3) Presets information is stored at the converter or
control module, not the dome.
(4) Requires AD2083-02 with firmware version 0701-
11YB-156A or newer. Preset information is stored in
the dome, not the converter.
(5) Patterns are limited by time and the number of
available dome commands. Total time for each
pattern cannot exceed 6 minutes 50 seconds. Total
dome commands used in all patterns cannot exceed
99.
(6) Requires additional equipment to achieve these
numbers. A dome address within each group of 64 or
99 cameras is reserved as a global broadcast address.
AD2050
Supported Protocol
Maximum Presets
Maximum Patterns
DirectSet Menu
Address Range
Notes:
(1) Requires the AD2083-02 series code converter.
(2) Preset information is stored at the converter, not the
dome.
(3) Requires AD2083-02 with firmware version 0701-
11YB-156A or newer. Preset information is stored in
the dome, not the converter.
(4) Patterns are limited by time and the number of
available dome commands. Total time for each
pattern cannot exceed 6 minutes 50 seconds. Total
dome commands used in all patterns cannot exceed
99.
(5) Requires additional equipment to achieve these
numbers. A dome address within each group of 64 or
99 cameras is reserved as a global broadcast address.
100 of 140
(1)
SensorNet
(1) or (2)
RS-422
(1)(2) (1)(3)
16 , 64 , or 60
(5)
3
Not supported
SensorNet: 1-180
(1)(6)
RS-422: 1-99
(2)(6)
1-180
(1)
RS-422
(2)
16 or
(3)
60
(4)
3
Not supported
(5)
1-1024
8200-0600-01, REV. B
(4)
or